 |
 |
|
|
|
|
Customer Station Specifications
Cryogenic Storage Tanks
|
|
| Model: | 300 | 500 | 700 | 1500 | 3000 | 6000 | 9000 | 11000 | 13000 | 15000 |
|
Water
volume @ 100 % Gallons / (Lt) |
353 (1337) |
564 (2135) |
711 (2692) |
1577 (5970) |
3175 (12019) |
6234 (23600) |
9665 (36586) |
11506 (43552) |
13345 (50517) |
15185 (57483) |
|
Cold
Volume @ 95% Gallons / (Lt) |
335 (1270) |
536 (2028) |
675 (2557) |
1498 (5671) |
3016 (11417) |
6047 (22892) |
9375 (35488) |
11164 (42246) |
12945 (49001) |
14730 (55758) |
| MAWP psig / (Kg/cm2): | 250 (17.58) |
250 (17.58) |
250 (17.58) |
250 (17.58) |
250 (17.58) |
250 (17.58) |
250 (17.58) |
250 (17.58) |
250 (17.58) |
250 (17.58) |
| Product: | LIN/LOX/ LAR |
LIN/LOX/ LAR |
LIN/LOX /LAR |
LIN/LOX/ LAR |
LIN/LOX/ LAR |
LIN/LOX/ LAR |
LIN/LOX /LAR |
LIN/LOX/ LAR |
LIN/LOX/ LAR |
LIN/LOX/ LAR |
| Empty weight Lb / (Kg): | 3128 (1419) |
4006 (1817) |
4740 (2150) |
5952 (2700) |
10564 (4792) |
17623 (7994) |
26455 (12000) |
28585 (12966) |
32804 (14880) |
36574 (16600) |
| Width inches / (m): | 57.5 (1.46) |
57.5 (1.46) |
57.5 (1.46) |
79.6 (2.02) |
96(2.44) | 96 (2.44) |
116.3 (2.95) |
116.3 (2.95) |
116.3 (2.95) |
116.3 (2.95) |
| Height: inches / (m): | 107.25 (2.72) |
137.25 (3.48) |
159.125 (4.04) |
171.25 (4.35) |
200.25 (5.1) |
331.18 (8.4) |
353 (8.97) |
405.9 (10.3) |
459 (11.66) |
512 (13) |
| Evaporation rate Less than (%): | 0.6 LIN | 0.6 LIN | 0.6 LIN | 0.6 LIN | 0.5 LIN | 0.5 LIN | 0.4 LIN | 0.4 LIN | 0.4 LIN | 0.4 LIN |
| Design & Manufacturing codes |
| ASME Section VIII Division 1, Last Edition, Last Addenda Stamped "U-1" |
| Inner vessel: CGA-341 Last Edition |
| Materials: |
| 1. INNER VESSEL: | SA-353-NNT Ni 9%Hemispherical heads SA-353-NNT Ni 9%RT-1 Full Radigraphic Stamped ASME "ULT" |
| 2. MANWAY | SA-353-NNT Ni 9% 16" Diameter welded, Not-Entry |
| 3. INNER PIPING: | SA-312-304 Stainless Steel |
| 4. INSULATION: | Composite |
| 5. INTERNAL SUPPORTS: | SA-240-304 Stainless Steel |
| 6. OUTER JACKET: | SA-36 / SA-285-C Carbon Steel |
| 7. OUTER JACKET PADS: | SA-240-304 |
| 8. LIFTING LUGS: | SA-36 (The unit shall be lifted empty) |
| 9. NAMES PLATES | ASME nameplate "original" welding attached inner vessel ASME nameplate "Duplicate" welding attached to outer top head |
| 10. EXTERNAL PIPING | *Cryogenic Globe Valves (Bronze). *Piping Material: Copper Type "L" option: Stainless Steel 304.*CGA Connection for Oxygen and Nitrogen *Aluminum Identification plates for valves.*Safety system: 2 Safety Valves set at MAWP & 2 Burst Disc set at 1.5 MAWP |
| 11. PRESSURE BUILD COIL | Pressure building coil, for inner vessel included Material: SB-221-6063-T5 /MAWP: 350 psig Vaporizer product withdrawal not included. |
| 12. PAINTING: | Primer: 25P Dupont, 3-4 Mils DFT gray Finishing: Imron 326 Dupont white color standard. Decals supplied: Product / Flow diagram |
| 13. TESTING STANDARD: | Inner vessel pressure test according to ASME code.· Inner & Outer jacket helium leak test.· Warm vacuum retention test, 72 Hrs.· Ner test of 1st unit of every series· Cold Shock test.· Operation Cryogenic test |
| 32. QUALITY CONTROL DOSSIER | ASME U-1, Form· Report Test· Report of material· Radiographic report· Welding certification· General Arrangement |
|
Universal Industrial Gases, Inc.
2200 Northwood Ave. Suite 3
Easton, Pennsylvania 18045-2239 USA
Phone (610) 559-7967 Fax (610) 515-0945
All material contained herein Copyright 2003 / 2012 UIG.
